Simon International Technology Co., Ltd.
 

Industrial Monitor

Product: Industrial Monitor

Model No.: PPM150

  • Panel mount TFT LCD monitor. 
  • Size available: 6.4", 8.4", 10.4", 12.1", 15", 17" 
  • Multi-input optional: VGA, DVI, Video in... 
  • Front bezel: Aluminum with baked painting. 
  • Metal chassis enclosure with baked painting. 
  • Front bezel with vandal proof glass, IP65 / NEMA4 compliant. 
  • Optional touch screen: Resistive, capcitive, tough touch...



Industrial Monitor

Product: Industrial Monitor

 Model No.:FPM121

12.1" Open Frame Display Solution.
Industrial grade display solution, Heavy duty sheet metal housing, open frame architecture, easy to install on most of the kiosk, machinery platform, equipped with anti-reflection tempered protection glass, prevent the damage of LCD panel due to impact by accident. Also have optional touch sensor available.

Best data, graphic & video display solution.
High resolution, high brightness TFT LCD,
Active area: 246mm x 184.5mm
Resolution: 800 x 600.
Brightness: 400cds/M2 , Contrast ratio 500:1,
Response Time: 35ms (Typical)
Display Colors: 16.7M
Viewing Angle: +70°~-70°(H), +50°~-60°(V)

Multiple Input signal sources, accept most format of the video signal.
D-sub 15pin analog VGA, optional Video (RCA) / S-Video (mini DIN) & DVI-D

Touch sensor integrable, easy input / selection methods.
Available sensor option: 5 wires resistive touch sensor, capacitive touch sensor.
Available controller option: serial (RS-232) interface or USB interface.

Detachable OSD keyboard, can be remove after installation, attachable any time when need to re-configuration the display. Also provide the hot key to lock the OSD key when OSD keyboard installed, prevent unexpected adjust of the display.

FPM series available for following size of the display,
20.1 inch SVGA TFT LCD, 19 inch SXGA TFT LCD, 17 inch SXGA TFT LCD,
15 inch XGA TFT LCD, 12.1 inch SVGA TFT LCD, 10.4 inch SVGA TFT LCD,
8.4 inch SVGA TFT LCD, 6.4 inch VGA TFT LCD.

Available 5 wire Resistive touch sensor, ELO AccuTouch series & SIT 5-wire series.
Available Capacitive touch sensor, 3M ClearTek series.

 



Industrial Monitor

Product: Industrial Monitor

 Model No.: CPM150

15" Chassis Display Solution.
Industrial grade display solution, Heavy duty sheet metal housing, chassis version architecture, easy to install on robotic VESA arm, equipped with anti-reflection tempered protection glass, prevent the damage of LCD panel due to impact by accident. Also have optional touch sensor available.

Best data, graphic & video display solution.
High resolution, high brightness TFT LCD,
Active area: 304mm x 228mm
Resolution: 1024 x 768.
Brightness: 500cds/M2 , Contrast ratio 400:1,
Response Time: 16ms (Typical)
Display Colors: 16.7M
Viewing Angle: +70°~-70°(H), +60°~-60°(V)

Multiple Input signal sources, accept most format of the video signal.
D-sub 15pin analog VGA, optional Video (RCA) / S-Video (mini DIN) & DVI-D

Touch sensor integrable, easy input / selection methods.
Available sensor option: 5 wires resistive touch sensor, capacitive touch sensor.
Available controller option: serial (RS-232) interface or USB interface.

Detachable OSD keyboard, can be remove after installation, attachable any time when need to re-configuration the display. Also provide the hot key to lock the OSD key when OSD keyboard installed, prevent unexpected adjust of the display.

75mm & 100mm standard VESA mounting holes on the rear of chassis.
Rigid desktop stand also available to fix on the VESA mounting holes.

CPM series available for following size of the display,
20.1 inch SVGA TFT LCD, 19 inch SXGA TFT LCD, 17 inch SXGA TFT LCD,
15 inch XGA TFT LCD, 12.1 inch SVGA TFT LCD, 10.4 inch SVGA TFT LCD,
8.4 inch SVGA TFT LCD, 6.4 inch VGA TFT LCD.

Available 5 wire Resistive touch sensor, ELO AccuTouch series & SIT 5-wire series.
Available Capacitive touch sensor, 3M ClearTek series.

 



Industrial Monitor

Product: Industrial Monitor

 Model No.: PPP150

15" Panel Mount Display Solution. Sunlight readable series.
Industrial grade display solution, ultra high brightness LCD panel, up to 1,700 nits, readable under direct sunlight, best for outdoor application.
Anode treated aluminum front bezel with IP65 rated seal, make the front bezel totally water and dust proof, suite for hazed environment, equipped with anti-reflection tempered protection glass, prevent the damage of LCD panel due to impact by accident. Also have optional touch sensor available.

Best data, graphic & video display solution.
High resolution, high brightness TFT LCD,
Active area: 304mm x 228mm
Resolution: 1024 x 768.
Brightness: 1,700cds/M2 , Contrast ratio 600:1,
Response Time: 16ms (Typical)
Display Colors: 16.7M
Viewing Angle: +60°~-60°(H), +45°~-60°(V)

Multiple Input signal sources, accept most format of the video signal.
D-sub 15pin analog VGA, optional Video (RCA) / S-Video (mini DIN) & DVI-D

Touch sensor integrable, easy input / selection methods.
Available sensor option: 5 wires resistive touch sensor, capacitive touch sensor.
Available controller option: serial (RS-232) interface or USB interface.
Integrated with touch sensor, still keep front bezel IP65 compliant.

Detachable OSD keyboard, can be remove after installation, attachable any time when need to re-configuration the display. Also provide the hot key to lock the OSD key when OSD keyboard installed, prevent unexpected adjust of the display.

PPP series available for following size of the display,
17 inch SXGA TFT LCD with 1,000cds/M2,
15 inch XGA TFT LCD with 1,700cds/M2,
10.4 inch SVGA TFT LCD with 1,500cds/M2.

Available 5 wire Resistive touch sensor, ELO AccuTouch series & SIT 5-wire series.
Available Capacitive touch sensor, 3M ClearTek series.


 



Industrial Monitor

Product: Industrial Monitor

 Model No.: PD121AN

12.1” POS Display Solution.
Space saving desktop display solution for POS system, suite for size limited counter, optional anti-reflection tempered protection glass, prevent the damage of LCD panel due to impact by accident. Also have optional touch sensor available.

Best data, graphic & video display solution.
High resolution, high brightness TFT LCD,
Active area: 246mm x 184.5mm
Resolution: 1024 x 768.
Brightness: 230cds/M2 , Contrast ratio 200:1,
Response Time: 100ms (max.)
Display Colors: 16.7M
Viewing Angle: +45°~-45°(H), +15°~-45°(V)

Input signal sources:
D-sub 15pin analog VGA.

Touch sensor integrable, easy input / selection methods.
Available sensor option: 5 wires resistive touch sensor.
Available controller option: serial (RS-232) interface or USB interface.

Lockable OSD keyboard, prevent unexpected adjust of the display.

PD series available for following size of the display,
12.1 inch XGA TFT LCD, 10.4 inch SVGA TFT LCD.

Available 5 wire Resistive touch sensor, ELO AccuTouch series & SIT 5-wire series.

 



Tel : +886-2-2999-6266
Fax : +886-2-2999-6106
(241) 3F-9, No. 12, Lane 609, Sec 5, Chung Hsin Rd,. San Chung City, Taipei Hsien, Taiwan, R.O.C.
More Products: http://www.simonit.com.tw
Inquiry: simonlo@simonit.com.tw