IPC I/O Boards

TOPS CCC Products Co., Ltd. Product: Data Acquisition Remote Control Module Model No.: EX-9520 series TOPS CCC is a professional manufacture of Data Acquistion include RS485,DIO,AIO,and Embedded Module for Factory Automation and application. which are relate to DAQ,SCADA,OA,FA,BA,HMI,RTU,& DLL ....etc.system. Also our products(I/O Module,Embedded Module) can be used for all SCADA software package include CITEC, Labview, Wondware, and Dasylab. Tel : 886-2-2799-9080 Fax : 886-2-2627-1606 114, 5., No.12, Lane 345, Yang-Guang St, Nei-Hu, Taipei, Taiwan R.O.C. More Products: http://www.topsccc.com Inquiry: bonnie@topsccc.com ; jack@topsccc.com

 

JS Automation Corp. Product: IPC I/O Boards Model No.: MPC-3024 4-axis Motion Control card for Servo/Stepping Motor Control 4-axis servo/stepping motor control 4 28-bit up/down counter for incremental encoder 4 28-bit up/down counter for pulse handler input Pulse output rate up to 6.55MHz Pulse output option: OUT/DIR, CW/CCW 2~4 axes linear interpolation Any 2 axes circular interpolation Continuous interpolation Speed change on-the-fly Position latch function Programmable acceleration/deceleration time Linear and S-curve acceleration curve Simultaneously start/stop on multi-axes Programmable interrupt conditions Backlash compensation Software limit switches protection Software key function 2 nibble configurable digital TTL I/O Tel : +886-2-2647-6936 Fax : +886-2-2647-6940 6F, No. 100, Chung-Shin Rd., Shi-Tsu, Taipei (221), Taiwan More Products: http://www.automation.com.tw Inquiry: control.cards@automation.com.tw

 

JS Automation Corp. Product: IPC I/O Boards Model No.: LSI-2104 4-axis Quadrature Encoder Counter card 2 MHz max. Quadrature input rate Four 32-bit counters Quadrature, pulse/direction and up/down counting Programmable multiply rate at X1, X2, X4 Load preset value to counter by external trigger or software trigger Latch counter value by external trigger Multiple counter reset (homing) modes Differential or single-end input signal Compare out (0.3s one shot) at X, Z axis Supports DIN rail mounted wiring board Tel : +886-2-2647-6936 Fax : +886-2-2647-6940 6F, No. 100, Chung-Shin Rd., Shi-Tsu, Taipei (221), Taiwan More Products: http://www.automation.com.tw Inquiry: control.cards@automation.com.tw

 

JS Automation Corp. Product: IPC I/O Boards Model No.: AIO-3310 Analog I/O Card 8 channel 12bit analog inputs (standard: 8 channels) Software selectable input range: -10V~ +10V, -5V~ + 5V, 0~10V, 0~5V Factory pre-calibrated analog conversion accuracy 2 byte-wide programmable TTL i/o IO00, IO01 as trigger/counter in, IO10, IO11 as trigger out of timer/counter function 2 32bit multifunction counters up to 33MHz Multi-function: -programmable one-shot -square wave generator -event counter -PWM generator Software key function Tel : +886-2-2647-6936 Fax : +886-2-2647-6940 6F, No. 100, Chung-Shin Rd., Shi-Tsu, Taipei (221), Taiwan More Products: http://www.automation.com.tw Inquiry: control.cards@automation.com.tw

 

JS Automation Corp. Product: IPC I/O Boards Model No.: DIO-2232 64-channel Digital I/O Card for 32 DI and 32 DO Photo-coupler Isolated 32 isolated DI and 32 isolated DO channels High voltage isolation on all isolated channel (2500 Vac) Supports DIN rail mounted wiring board Output status readback Tel : +886-2-2647-6936 Fax : +886-2-2647-6940 6F, No. 100, Chung-Shin Rd., Shi-Tsu, Taipei (221), Taiwan More Products: http://www.automation.com.tw Inquiry: control.cards@automation.com.tw